INROCK BUILDING ROLLS - INNER ENGINEERING PRODUCTS & SYSTEMS PVT LTD

INROCK Building Rolls used mainly in pre-engineered buildings (PEB) for roofs and walls to achieve excellent thermal, fire and acoustic insulation. It can be used for both under and over purlin application on the roof.

They consist of fine fibres spun from a range of selected rocks melted at high temperature bonded with a thermosetting resin faced/ laminated with flexible facings like – FSK & ALG etc.

They are light weight, strong, resilient, and easy to handle and cut to suit customer site specific requirements.

Facings

INROCK Building Rolls are available with flexible facings like – FSK & ALG *

* Under new product development process

Standard Dimensions

Thickness (mm)	Width (mm)	Length (mm)
50 to 100	1.1* & 1.2	7 – 10

* With two side 50mm overlapping flaps

Standard Density

Density (kg/m³)	Thickness (mm)
48	50-100
64	50-100
80#	50

# Under new product development process

Technical Data

Temperature Range	Up to 400^oC (As per IS 8183: 1993 & IS 3144)
Chemical Composition	Chloride content - less than 10 mg/kg Sulphur Content - 0.6% Oil Content - 0.2% Carbon content - 0.3%
PH value	7 to 8
Fiber Properties	Fiber Diameter - less than 7 microns Shot content - Less than 5% of total weight (less than 5% on 500micron & 5% retention on 250micron)
Fire properties	Fire spread index - less than 5 Smoke developed index - less than 50
Product Specification	Std. Size : Length 7 to 10m x Width 1100mm (both side 50mm overlapping flaps)/1200 mm(without flaps) Density : 48 Kg/m3 to 80 Kg/m3 Thickness : 50 mm to 100 mm Facing : FSK & ALG
Physical properties	CFC & HCFC free Asbestos free Corrosion resistance Non capillary attraction Linear shrinkage less than 2%
Recovery after compression	More than 90% of original thickness
Moisture absorption	Less than 2%
Water vapour permeability	Less than 0.2 perms
NRC	Up to 1.0
Biological properties	Non-Hygroscopic, Rot proof
Environmental effect	Does not affect Ozone depletion potential (ODP) Global warming potential (GWP) < 5

Note: Tolerance & Specification Confirms to IS: 8183 & ASTM C 553.

Handling & Storage

INROCK Building rolls should be stored indoor, if stored outdoors should stacked above ground level & securely covered with weather proof sheets / tarpaulin.

Thermal Conductivity (As Per IS: 8183, IS: 3346, ASTM C 518 / ASTM C 177)

Initial K Value (W/m.K) at different Mean Temperatures (max.) and Densities

Mean Temp. (^oC)	Density (kg/m³)
	48	64	80#
10	0.036	0.034	0.033
25	0.037	0.036	0.035
50	0.038	0.037	0.037
100	0.044	0.043	0.043

Applications

Most economical solution for Roof Insulation
Under deck Insulation
Pre engineering buildings (PEB)
Pre fabricated houses
HVAC Duct Insulation
Cattle & Poultry forms
Tanks
Irregular shapes
Large Vessels
Ovens
Textile Machinery Equipments
Power Plants
Flanges
Valves
Steam pipelines
Reactors

Features

Excellent Thermal Insulation
Excellent Fire Insulation
Excellent Sound Absorption
Excellent Water Resistance
Non – Combustible hence Fire Safe
Non – Hygroscopic hence Moisture Safe
Non – Corrosive
Non – Carcinogenic
High Thermal Resistance
High Temperature Resistance
High Mechanical Strength
High Durability
Low Thermal Conductivity
Thermally & Dimensionally Stable
Easy to Handle
Easy to Cut
Easy to Application
Fungi Resistance
Corrosion Proof
No objectionable odor / VOC