Let’s Start Work
Together
Please feel free to contact us. We will get back to you with 1-2 business days. Or just call us now.
BRIEF DESCRIPTION
- INPUF® Rigid Polyurethane Foam is a closed cell, rigid material, gives high performance in thermal insulation for wide range of temperature.
MATERIAL TYPE
- INPUF® Rigid Polyurethane Foam is two component, hydro-flouro-carbon (CFC free) blown, polymeric M.D.I. based system.
APPLICATION
- Low & high temperature thermal insulation to reduce heat flow rate.
SAMPLING CRITERIA & CONFORMS
- IS 12436: 1988 Specification (PUF 1 Grade)
DIMENSIONAL TOLERANCE
- For length, width ±2mm & for thickness ±2mm
STANDARD DIMENSIONS
| Pipe Section | |
|---|---|
| Length | 1m |
| Width | - |
| Pipe Dia | 0.5” to 8” |
| Thickness | 25mm, 50mm & 75mm |
| Properties | Test Method |
|---|---|
| Density | IS 11239 (Part 2) |
| Service Temperature | – |
| Thermal Conductivity (Initial) | ASTM C518 |
| Dimensional Stability at 100°C | IS 11239 (Part 3) |
| Water Vapor Permeability | IS 11239 (Part 4) |
| Closed Cell Content | IS 11239 (Part 5) |
| Compressive strength at 10% deformation | IS 11239 (Part 11) |
| Horizontal Burning | IS 11239 (Part 12) |
| Water Absorption (With Laminated) |
ASTM D2842 |
- CAUTION: “Always store in packed condition under covered shed and raised platforms.”
DISCLAIMER
- Technical information and recommendations contained herein are based on properties only as a guide. They do not constitute a product specification nor are they to be construed in any manner as warranties expressed or implied. The user shall determine the suitability of the product for its intended use and the user assumes all risk and liability whatsoever in connection therewith.
x
